Initiation / Produce / Metalworking fluids / Forming lubricants

Forming lubricants

Why use fluids for machining metalflow?

Coolants

Cutting oils

Forming lubricants

metalform forming lubricants

Increase of productivity:

• Faster forming cycle.

• Better part finishing and rust protection.

High lubrication.

High flash point and low mist formation.

Chlorinated-free products and low aromatic content.

Low or odourless products.

Extreme pressure and anti-welding.

METALFORM forming lubricants meet the following functions:


flow	cooling	lubrication	protection
Facilitate the flow of the metal through dies and stamps to ensure an optimal friction coefficient.	When using soluble products and dispersions, they control and reduce the temperature generated by the forming process itself.	Reduce tool and stamp wear caused by friction with the formed piece.	Corrosion and rust protection of pieces, dies, stamps and machines.

We show you our range of metalform forming lubricants

range V - vanishing Products

residue-free

Vanishing products free of viscous mineral oils, that evaporate after each use.

Quick drying, corrosion protection and excellent finishing of the part without requiring further degreasing process.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Additional information:

· Suitable for grey and yellow alloys.

· Suitable for trimming, punching and stamping processes.

Range P - pure OILS

High antiwear

properties

Highly refined straight oils with a very low content in aromatic compounds.

Protection film against oxidation and corrosion of the pieces.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Additional information:

· Suitable for grey and yellow alloys.

· Suitable for deep drawing, trimming, punching and stamping operations.

Range S - soluble liquids

Biostable

Biostable soluble liquids with lubricating and cooling functions.

High antirust protection and compatibility with individual and centralized systems.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Additional information:

· Suitable for grey and yellow alloys.

· Suitable for wire drawing, deep drawing, stamping and roll forming operations.

Range W - PURE OILS

EXTREME PRESSURE

easy dEGREASING

Straight oils for an easy further degreasing of the parts.

Content in polar and extreme pressure additives with a high performance in the metal forming process.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Additional information:

· Suitable for grey alloys.

· Suitable for wire drawing, deep drawing and stamping operations.

Range D - Content of solid lubricants

colloidal

dispersions

Colloidal dispersions of solid lubricants in water or oil.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Additional information:

· Suitable for grey and yellow alloys.

· Suitable for extrusion deep drawing and stamping operations.