Surface protectors

Surface protectors

 

 

 

metalprot surface protectors

Suitable for any part and surface, size and metal.

Optimal water and humidity displacement.

Top-up of fresh product in the sump without altrations or malfunctions.

Excellent appearance and formation of the protective film.

Excellent antirust and anticorrosion properties.

No dangerous or toxic and low or odorless products.

Suitable for different application systems: dipping in tank, direct with spray gun or brush.

 

metalprot surfacee protectors meet the following functions:

 

 

protection

evacuation

prevention

Metal surface protection against rust and corrosion for piece storage or transport, as well as against shocks and scratches.

Easy remaining water removal from piece's surface thanks to their water repelling properties.

Avoiding of acid affection on the pieces due to th direct manipuation (skin contact) by the workforce.

We show you our range of metalprot surface protectors

 

range 1000 - oily film

 

Solvents containing mineral oil to form an oily film.

 

Indoor protection period 2-9 months depending on the product.

 

Salt spray resistance of 3,5h to 35h depending on the product.

 

Protection for plates, coils, mechanical assemblies and machined parts of any size.

 

range 2000 - oily & water-repellent film

 

Solvents containing mineral oil and a water-repellent agent for the formation of an oily and hydrophobic film to easily remove the residuary water.

 

Indoor protection period from 1 month to 9 months depending on the product.

Resistance 150 hours humidity chamber at 20% depending on the product.

Salt spray resistance from

 

Protection for machined parts, plates and tubes made with soluble oils.

 

range 3000 - oily-greasy film

 

Solvents containing mineral oil and purified fats to create an oily-greasy film.

 

Indoor protection period 3-12 months depending on the product.

Salt spray resistance from 20h to 72h depending on the product.

 

Protection for machined parts, plates, strips, bearings, machinery, precision equipment, automobile, marine and airplane engines and mechanical assemblies. Also for parts machined, formed, temperated or rinsed with soluble products.

Range 4000 - waxy film

 

Dispersions of microcrystalline waxes with high melting point with solvents containing mineral oil to create a waxy film.

 

Protection period of 24-36 months depending on the product.

Drying time of the parts of 45 minutes to 12 hours.

 

Protection for machined parts. Good for maritime transport processes, areas with tropical climate, wet industrial environments, extended storage and export.

 

range 5000 - plastic film

 

Dispersions of polymer resins in solvents containing mineral oil to generate an antirust and anticorrosion plastic film.

 

Transparent and elastic protection for structural parts, machined parts, cutting and precision tools made of any metal both ferrous and non-ferrous.

 

Provide excellent protection against mechanical abrasions caused by contact or friction with other parts and components.

All metalflow products

They are produced in our plants

The adapt them to any need

We make them give the best performance


Are you not sure of the cooling you need?
Are not sure about the best product for you?
Imagen de seguimiento